 |
Bracket Cover Right
The bracket cover is used for covering the rough inside of the bracket and creates a more finished look to the storage. |
 |
Drawer Bottom Liner
The bottom liner fits the bottom of the elfa drawers and protects the clothes from taking on the wire pattern. They are packed by two. |
 |
End Caps for Closet Rod
The end caps give a finished look to the closet rod. Snap a cap on each end of the rod. Each package contains two end caps. |
 |
Set of Screws and Plugs
Use this hardware when installing your elfa décor storage on wooden walls or on concrete, stone or brick walls.
When installing on walls with plaster over wooden core or solid wooden walls, do as follows: Pre-drill a 3 mm hole to have a first hole that corresponds to the length of the drill. There is no need to use the plugs. Pull tight with a screwdriver.
When installing the storage on to concrete, stone or brick walls, do as follows: Use an 8 mm hammer drill when drilling the holes. Punch the expander plug in place. Pull tight with a screwdriver.
There are 10 screws and 10 plugs per package. |
 |
Expander for ½ Plasterboard
Use the expanders for 3 - 17 mm thick walls of plaster or chipboard. Drill a hole with a 10 mm drill. Punch the expander plug in place. Pull tight with a screwdriver.
When installing a top track, the grey spacing sleeve of this hardware set should not be used. Four expanders per package. |
 |
Expander for 1/1 Plasterboard
Use these expanders for 18 - 30 mm walls of plaster or chipboard. Drill a hole with a 10 mm drill. Punch the expander plug in place. Pull tight with a screwdriver.
When installing a top track, the grey spacing sleeve in this set should not be used. Four expanders per package. |
| Previous page |
